Looking at https://releases.linaro.org/debian/boards/snapdragon/latest/

I can see I need
boot-qcom-apq8064-cm-qs600-qcom-snapdragon-20151210-20.img.gz
<https://releases.linaro.org/debian/boards/snapdragon/latest/boot-qcom-apq8064-cm-qs600-qcom-snapdragon-20151210-20.img.gz>
and qcom-apq8064-cm-qs600.dtb
<https://releases.linaro.org/debian/boards/snapdragon/latest/qcom-apq8064-cm-qs600.dtb>
for
the Utilite but not sure if it supports the Version 1 devices ?

I am really not sure what to do with all the files to make a distro with
them and Jessie though I have an idea what they are and am used to x86
Linux ISO's.

Help !




On 26 January 2016 at 01:37, Wookey <woo...@wookware.org> wrote:

> +++ Aaron Gray [2016-01-25 23:14 +0000]:
> > Hi,
> >
> > I have a couple of ARM devices that I bought quite a while back and
> > want to put them into use. I am not sure if this is the best linaro
> > list but I could not see another that seemed appropriate.
> >
> > I have a Utilite Version 1 device and a IFC6410 device that I want to
> > get working with Linaro.
> >
> > I am a C/C++/x86 programmer.
> >
> > Also I am familiar with the Linux Kernel from 2.4/6 days, and have run
> > personal Fedora servers for over 7 years. Now I want to replace my HP
> > DL 140 G3's with the ARM based servers.
> >
> > I built a Kali release for the Utilite some time ago which was quite
> > straight forward and then tried unsuccessfully to backport it to
> > Debian.
> >
> > So what I want to know is two things basically
> >
> >     a) can Linaro run on the Utilite Version 1, is the uBoot stuff
> > different from the version 2 and is there kernel support for the
> > version 1
>
> Linaro is not a distro ;-) Although it does put out quite a lot of
> images. Did you have a particular one in mind?
>
> Here is a page on installing Debian which may be helpful (I know nothing
> of the Utilite)
> https://wiki.debian.org/InstallingDebianOn/CompuLab/PC-Utilite/wheezy
>
> It may well have got rather easier since that was written. Other imx6
> boards are somewhat supported in jessie, although most seem to need a
> custom
> kernel: https://boundarydevices.com/debian-installer-on-i-mx6/
>
> >     b) It there an easy HOWTO to put the distro together onto an
> > uSDCard for the Utilite
> >
> >     c) It there an easy HOWTO to put the distro together onto an
> > uSDCard for the IFC6410
> >
> > Hope you can point me in the right direction.
>
> The above links may help.
>
> Wookey
> --
> Principal hats:  Linaro, Debian, Wookware, ARM
> http://wookware.org/
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev@lists.linaro.org
> https://lists.linaro.org/mailman/listinfo/linaro-dev
>
>
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
https://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to