Hi, Torben After confirmation with Freescale, the binary format of manufacturing tool is uploaded here. I have a README file for check. Can you give it a try?
http://people.linaro.org/~guodongxu/myupload/freescale_tools/ Please follow Philipp's steps. And let us know whether this fixes your problem. After that, I can update Linaro's wiki page accordingly. And for sure your input can help lot of others. :) Thanks. Best regards, Guodong Xu 在 2012-5-23，下午4:35， Guodong Xu 写道： > Hi, Trodden > > I am checking with Freescale for this. So far answer I copied below: > - Note: "not available at Freesacle's external website" usually means it is > still not released to public. > > Richard and I are still checking for that. Will update you once we got more > information. > > Thanks. > Best regards, > Guodong Xu > > > >> > On 22 May 2012 14:40, Li Frank-B20596 <b20...@freescale.com> wrote: >> We have imx6q sabrelite manufacturing tool. >> But it has not released at external websit. >> Only external compass. I am not sure how to get it from external. > > << > > Regards, > Guodong Xu > > 在 2012-5-22，下午4:49， Ahmann, Philipp (ADITG/SW2) 写道： > >> Hello Torben, >> >> I can provide the instructions how to use the MFG-Tool. >> >> Please note, that this tool works in Windows and not Linux and that I am >> not completely aware, in which state you will receive this tool from >> Freescale (I cannot provide the tool, please ask FSL to receive it). I >> will describe the steps based on my installation. >> >> Please read them carefully until the end, before you execute them. >> >> - Connect the SabreLite via the USB-OTG port to your PC and start the >> MFG-Tool >> - In the left bottom corner of the MFG-tool main window you will find >> the status information field containing Profile, status, version. >> - Click "Scan devices" (most likely nothing will be found) >> - Choose Options->Configuration...->USB-Ports >> and search for something like "Linux-File-Stor..." or "HID-device..." >> or similar and check this device >> - Choose Options->Configuration...->Profiles >> and check the right bootloader from "Options". It could be something >> like "Sabre-lite-SPI_NOR-1" [1] >> - Afterwards press the green start button on the right bottom corner and >> wait until the action is complete. >> - In the end insert the SD-Card created with lmc or whatever, unplug the >> board from the OTG-port and boot the board as normally. >> >> Please note: This description comes without any warranty. In case of any >> open questions please do not hesitate to contact me. >> >> [1] The bootloader of your choice can be identified from the config-file >> in the installation directory: >> - Open <install_Dir>\Profiles\MX6Q Linux Update\OS Firmware\ucl.xml with >> your favorite editor >> - Search for the bootloader name which is something like >> "MX6_SPI_to_SD_loader.bin" and check the name which will be showed in >> the Options column which could be e.g. name="Sabre-lite-SPI_NOR-1" >> >> Best regards, >> Philipp >> --- >> >>> -----Original Message----- >>> From: linaro-dev-boun...@lists.linaro.org [mailto:linaro-dev- >>> boun...@lists.linaro.org] On Behalf Of Dirk Behme >>> Sent: Sonntag, 20. Mai 2012 18:39 >>> To: Torben Zeleny >>> Cc: Richard Zhao; linaro-dev@lists.linaro.org >>> Subject: Re: Manufacturing tool for MX6QSabreLite >>> >>> On 18.05.2012 15:35, Torben Zeleny wrote: >>>> Dear Linaro-Dev-Team, >>>> >>>> we tried to getting started with the Freescale i.MX6Q Sabre Lite >>>> Boardand have some errors that you have mentioned at your homepage >>>> https://wiki.linaro.org/Boards/MX6QSabreLite: >>>> "In case you somehow do not succeed with this procedure you will >> have >>>> to use the manufacturing tool in order to reflash the SPI-NOR. In >>> that >>>> case please let me know and I can send you instructions how to >>> program >>>> the new loader with the manufacturing tool." >>>> Please send us the instructions. Thank you. >>> >>> Do you have the manufacturing tool for i.MX6? Or do you just need the >>> instructions? >>> >>> Best regards >>> >>> Dirk >>> >>> _______________________________________________ >>> linaro-dev mailing list >>> linaro-dev@lists.linaro.org >>> http://lists.linaro.org/mailman/listinfo/linaro-dev >> >> _______________________________________________ >> linaro-dev mailing list >> linaro-dev@lists.linaro.org >> http://lists.linaro.org/mailman/listinfo/linaro-dev >
_______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
