Hello Torben, I can provide the instructions how to use the MFG-Tool.
Please note, that this tool works in Windows and not Linux and that I am not completely aware, in which state you will receive this tool from Freescale (I cannot provide the tool, please ask FSL to receive it). I will describe the steps based on my installation. Please read them carefully until the end, before you execute them. - Connect the SabreLite via the USB-OTG port to your PC and start the MFG-Tool - In the left bottom corner of the MFG-tool main window you will find the status information field containing Profile, status, version. - Click "Scan devices" (most likely nothing will be found) - Choose Options->Configuration...->USB-Ports and search for something like "Linux-File-Stor..." or "HID-device..." or similar and check this device - Choose Options->Configuration...->Profiles and check the right bootloader from "Options". It could be something like "Sabre-lite-SPI_NOR-1" [1] - Afterwards press the green start button on the right bottom corner and wait until the action is complete. - In the end insert the SD-Card created with lmc or whatever, unplug the board from the OTG-port and boot the board as normally. Please note: This description comes without any warranty. In case of any open questions please do not hesitate to contact me. [1] The bootloader of your choice can be identified from the config-file in the installation directory: - Open <install_Dir>\Profiles\MX6Q Linux Update\OS Firmware\ucl.xml with your favorite editor - Search for the bootloader name which is something like "MX6_SPI_to_SD_loader.bin" and check the name which will be showed in the Options column which could be e.g. name="Sabre-lite-SPI_NOR-1" Best regards, Philipp --- > -----Original Message----- > From: linaro-dev-boun...@lists.linaro.org [mailto:linaro-dev- > boun...@lists.linaro.org] On Behalf Of Dirk Behme > Sent: Sonntag, 20. Mai 2012 18:39 > To: Torben Zeleny > Cc: Richard Zhao; linaro-dev@lists.linaro.org > Subject: Re: Manufacturing tool for MX6QSabreLite > > On 18.05.2012 15:35, Torben Zeleny wrote: > > Dear Linaro-Dev-Team, > > > > we tried to getting started with the Freescale i.MX6Q Sabre Lite > > Boardand have some errors that you have mentioned at your homepage > > https://wiki.linaro.org/Boards/MX6QSabreLite: > > "In case you somehow do not succeed with this procedure you will have > > to use the manufacturing tool in order to reflash the SPI-NOR. In > that > > case please let me know and I can send you instructions how to > program > > the new loader with the manufacturing tool." > > Please send us the instructions. Thank you. > > Do you have the manufacturing tool for i.MX6? Or do you just need the > instructions? > > Best regards > > Dirk > > _______________________________________________ > linaro-dev mailing list > linaro-dev@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-dev _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
