Hi, Trodden I am checking with Freescale for this. So far answer I copied below: - Note: "not available at Freesacle's external website" usually means it is still not released to public.
Richard and I are still checking for that. Will update you once we got more information. Thanks. Best regards, Guodong Xu >> On 22 May 2012 14:40, Li Frank-B20596 <b20...@freescale.com> wrote: > We have imx6q sabrelite manufacturing tool. > But it has not released at external websit. > Only external compass. I am not sure how to get it from external. << Regards, Guodong Xu 在 2012-5-22，下午4:49， Ahmann, Philipp (ADITG/SW2) 写道： > Hello Torben, > > I can provide the instructions how to use the MFG-Tool. > > Please note, that this tool works in Windows and not Linux and that I am > not completely aware, in which state you will receive this tool from > Freescale (I cannot provide the tool, please ask FSL to receive it). I > will describe the steps based on my installation. > > Please read them carefully until the end, before you execute them. > > - Connect the SabreLite via the USB-OTG port to your PC and start the > MFG-Tool > - In the left bottom corner of the MFG-tool main window you will find > the status information field containing Profile, status, version. > - Click "Scan devices" (most likely nothing will be found) > - Choose Options->Configuration...->USB-Ports > and search for something like "Linux-File-Stor..." or "HID-device..." > or similar and check this device > - Choose Options->Configuration...->Profiles > and check the right bootloader from "Options". It could be something > like "Sabre-lite-SPI_NOR-1" [1] > - Afterwards press the green start button on the right bottom corner and > wait until the action is complete. > - In the end insert the SD-Card created with lmc or whatever, unplug the > board from the OTG-port and boot the board as normally. > > Please note: This description comes without any warranty. In case of any > open questions please do not hesitate to contact me. > > [1] The bootloader of your choice can be identified from the config-file > in the installation directory: > - Open <install_Dir>\Profiles\MX6Q Linux Update\OS Firmware\ucl.xml with > your favorite editor > - Search for the bootloader name which is something like > "MX6_SPI_to_SD_loader.bin" and check the name which will be showed in > the Options column which could be e.g. name="Sabre-lite-SPI_NOR-1" > > Best regards, > Philipp > --- > >> -----Original Message----- >> From: linaro-dev-boun...@lists.linaro.org [mailto:linaro-dev- >> boun...@lists.linaro.org] On Behalf Of Dirk Behme >> Sent: Sonntag, 20. Mai 2012 18:39 >> To: Torben Zeleny >> Cc: Richard Zhao; linaro-dev@lists.linaro.org >> Subject: Re: Manufacturing tool for MX6QSabreLite >> >> On 18.05.2012 15:35, Torben Zeleny wrote: >>> Dear Linaro-Dev-Team, >>> >>> we tried to getting started with the Freescale i.MX6Q Sabre Lite >>> Boardand have some errors that you have mentioned at your homepage >>> https://wiki.linaro.org/Boards/MX6QSabreLite: >>> "In case you somehow do not succeed with this procedure you will > have >>> to use the manufacturing tool in order to reflash the SPI-NOR. In >> that >>> case please let me know and I can send you instructions how to >> program >>> the new loader with the manufacturing tool." >>> Please send us the instructions. Thank you. >> >> Do you have the manufacturing tool for i.MX6? Or do you just need the >> instructions? >> >> Best regards >> >> Dirk >> >> _______________________________________________ >> linaro-dev mailing list >> linaro-dev@lists.linaro.org >> http://lists.linaro.org/mailman/listinfo/linaro-dev > > _______________________________________________ > linaro-dev mailing list > linaro-dev@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-dev
_______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
