Hi, sorry for the late response. On 四, 2012-01-19 at 14:47 +0530, Amit Kachhap wrote: > On 13 December 2011 20:43, Amit Daniel Kachhap <amit.kach...@linaro.org> > wrote: > > PATCH 1) [thermal: Add a new trip type to use cooling device instance > > number] > > This patch adds a new trip type THERMAL_TRIP_STATE_ACTIVE which passes > > cooling device instance number and may be helpful for cpufreq cooling > > devices > > to take the correct cooling action. > > Sorry, I'm still not quite clear about how this will be used. Say, processor has P0~P3, then we need to register a thermal zone with three STATE_ACTIVE trip points, like the picture shown below?
processor in full speed, i.e. P0 ---------------------------- state active trip point 1 ---------------------------- processor in P1 ---------------------------- state active trip point 2 ---------------------------- processor in P2 ---------------------------- state active trip point 3 ---------------------------- processor in P3 > > PATCH 2) [thermal: Add generic cpu cooling implementation] > > This patch adds generic cpu cooling low level implementation through > > frequency > > clipping and cpu hotplug. In future, other cpu related cooling devices may > > be > > added here. An ACPI version of this already > > exists(drivers/acpi/processor_thermal.c). > > But this will be useful for platforms like ARM using the generic thermal > > interface > > along with the generic cpu cooling devices. The cooling device registration > > API's > > return cooling device pointers which can be easily binded with the thermal > > zone > > trip points. > > It seems that we can convert the ACPI processor thermal driver to follow this generic cpu cooling implementation, right? thanks, rui > > Any comments on these patches? I submitted them quite long back. > > Regards, > Amit D > > > > > Amit Daniel Kachhap (2): > > thermal: Add a new trip type to use cooling device instance number > > thermal: Add generic cpu cooling implementation > > > > Documentation/thermal/cpu-cooling-api.txt | 52 +++++ > > Documentation/thermal/sysfs-api.txt | 4 +- > > drivers/thermal/Kconfig | 11 + > > drivers/thermal/Makefile | 1 + > > drivers/thermal/cpu_cooling.c | 302 > > +++++++++++++++++++++++++++++ > > drivers/thermal/thermal_sys.c | 27 +++- > > include/linux/cpu_cooling.h | 45 +++++ > > include/linux/thermal.h | 1 + > > 8 files changed, 440 insertions(+), 3 deletions(-) > > create mode 100644 Documentation/thermal/cpu-cooling-api.txt > > create mode 100644 drivers/thermal/cpu_cooling.c > > create mode 100644 include/linux/cpu_cooling.h > > _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
