On Mon, Mar 07, 2011 at 09:05:58PM +0800, Jason Liu wrote: > Signed-off-by: Jason Liu <r64...@freescale.com> > --- > arch/arm/mach-mx5/Kconfig | 8 ++++ > arch/arm/mach-mx5/Makefile | 1 + > arch/arm/mach-mx5/board-dt.c | 64 > +++++++++++++++++++++++++++++++ > arch/arm/mach-mx5/clock-mx51-mx53.c | 43 ++++++++++++++++++++- > arch/arm/plat-mxc/include/mach/common.h | 1 + > 5 files changed, 116 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig > index de4fa99..6438f87 100644 > --- a/arch/arm/mach-mx5/Kconfig > +++ b/arch/arm/mach-mx5/Kconfig > @@ -47,6 +47,14 @@ config MACH_MX51_BABBAGE > u-boot. This includes specific configurations for the board and its > peripherals. > > +config MACH_MX51_DT > + bool "Generic MX51 board (FDT support)" > + select USE_OF > + select SOC_IMX51 > + help > + Support for generic Freescale i.MX51 boards using Flattened Device > + Tree. > + > config MACH_MX51_3DS > bool "Support MX51PDK (3DS)" > select SOC_IMX51 > diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile > index 0d43be9..540697e 100644 > --- a/arch/arm/mach-mx5/Makefile > +++ b/arch/arm/mach-mx5/Makefile > @@ -18,3 +18,4 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o > obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o > obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o > obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o > +obj-$(CONFIG_MACH_MX51_DT) += board-dt.o
If board-dt.c is mx51 specific, would it be sane to name it something like board-mx51-dt.c? We have mx53 stuff in this folder as well. -- Regards, Shawn _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev