sorry that was a local merge from my tree so previous known working lede commit would be c88770c766fdc5599efc4672bca230017f52e8e4
On Thu, Nov 9, 2017 at 7:21 PM, Outback Dingo <outbackdi...@gmail.com> wrote: > 7af22af0e9ebc0f69091af19a3104692c18fbe73 is the last known good commit > running on my board now..... time to walk the tree to narrow it down > it guess > > On Thu, Nov 9, 2017 at 5:57 PM, Koen Vandeputte > <koen.vandepu...@ncentric.com> wrote: >> >> >> On 2017-11-09 17:46, Outback Dingo wrote: >>> >>> On Thu, Nov 9, 2017 at 5:38 PM, Koen Vandeputte >>> <koen.vandepu...@ncentric.com> wrote: >>>> >>>> >>>> On 2017-11-09 16:40, Outback Dingo wrote: >>>>> >>>>> On Thu, Nov 9, 2017 at 4:16 PM, Koen Vandeputte >>>>> <koen.vandepu...@ncentric.com> wrote: >>>>>> >>>>>> >>>>>> On 2017-11-09 15:55, Outback Dingo wrote: >>>>>>> >>>>>>> heres more data, we still have a no interfaces issue with recent LEDE >>>>>>> trunk >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Thu, Nov 2, 2017 at 6:42 PM, Outback Dingo <outbackdi...@gmail.com> >>>>>>> wrote: >>>>>>>> >>>>>>>> seems that ive lost my eth0 / eth1 interfeaces on a RECENT ... today >>>>>>>> image built for the gw5520 >>>>>>>> i do however see the ifb0 and ifb1 interfaces... any ideas? >>>>>> >>>>>> >>>>>> Hi, >>>>>> >>>>>> As I have similar hardware, maybe I can help out. (GW 5510 and others) >>>>>> >>>>>> I'm not seeing the FEC driver being loaded in your log: (Freescale >>>>>> Ethernet) >>>>>> >>>>>> >>>>>> Snip from my 5510: >>>>>> >>>>>> >>>>>> [ 0.692354] libphy: Fixed MDIO Bus: probed >>>>>> [ 0.693357] libphy: mdio_driver_register: mv88e6085 >>>>>> [ 0.695036] 2188000.ethernet supply phy not found, using dummy >>>>>> regulator >>>>>> [ 0.697541] pps pps0: new PPS source ptp0 >>>>>> [ 0.701333] libphy: fec_enet_mii_bus: probed >>>>>> >>>>>> --> [ 0.702005] fec 2188000.ethernet eth0: registered PHC device 0 >>>>>> >>>>>> >>>>>> >>>>>> Please run "make kernel_menuconfig" and check if CONFIG_FEC is >>>>>> selected. >>>>>> >>>>>> >>>>> >>>>> Hi, the following were selected under drivers / ethernet >>>>> >>>>> [*] Freescale devices >>>>> │ │ >>>>> │ │ <*> FEC ethernet controller >>>>> (of ColdFire and some i.MX CPUs) >>>>> │ │ >>>>> │ │ < > Freescale PQ MDIO >>>>> │ │ >>>>> │ │ < > Freescale XGMAC MDIO >>>>> │ │ >>>>> │ │ < > Gianfar Ethernet >>>>> │ │ >>>>> │ │ [*] Hisilicon devices >>>>> >>>>>> Kind Regards, >>>>>> >>>>>> Koen >>>> >>>> >>>> Hi, >>>> >>>> Quickly checked a little more in-depth. >>>> >>>> (My board is a GW52xx.) >>>> >>>> Looking at dtsi, it seems that the fec part is not specified for the 552x >>>> >>>> As a test, could you add attached patch to your build? >>>> Just put it in target/linux/imx6/patches-4.9 and do a full rebuild (make >>>> clean; make) >>> >>> This board was working fine with LEDE in September? so im curious how >>> a dtsi file would regress in a few weeks >> >> Thats the reason for the quick test. Forcing it (yes, I checked dtsi >> history upstream. No, it didn't change) >> Otherwise .. please identify the commit causing the regression ;) >>>> >>>> >>>> Thanks, >>>> >>>> Koen >> >> _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
