7af22af0e9ebc0f69091af19a3104692c18fbe73 is the last known good commit running on my board now..... time to walk the tree to narrow it down it guess
On Thu, Nov 9, 2017 at 5:57 PM, Koen Vandeputte <koen.vandepu...@ncentric.com> wrote: > > > On 2017-11-09 17:46, Outback Dingo wrote: >> >> On Thu, Nov 9, 2017 at 5:38 PM, Koen Vandeputte >> <koen.vandepu...@ncentric.com> wrote: >>> >>> >>> On 2017-11-09 16:40, Outback Dingo wrote: >>>> >>>> On Thu, Nov 9, 2017 at 4:16 PM, Koen Vandeputte >>>> <koen.vandepu...@ncentric.com> wrote: >>>>> >>>>> >>>>> On 2017-11-09 15:55, Outback Dingo wrote: >>>>>> >>>>>> heres more data, we still have a no interfaces issue with recent LEDE >>>>>> trunk >>>>>> >>>>>> >>>>>> >>>>>> On Thu, Nov 2, 2017 at 6:42 PM, Outback Dingo <outbackdi...@gmail.com> >>>>>> wrote: >>>>>>> >>>>>>> seems that ive lost my eth0 / eth1 interfeaces on a RECENT ... today >>>>>>> image built for the gw5520 >>>>>>> i do however see the ifb0 and ifb1 interfaces... any ideas? >>>>> >>>>> >>>>> Hi, >>>>> >>>>> As I have similar hardware, maybe I can help out. (GW 5510 and others) >>>>> >>>>> I'm not seeing the FEC driver being loaded in your log: (Freescale >>>>> Ethernet) >>>>> >>>>> >>>>> Snip from my 5510: >>>>> >>>>> >>>>> [ 0.692354] libphy: Fixed MDIO Bus: probed >>>>> [ 0.693357] libphy: mdio_driver_register: mv88e6085 >>>>> [ 0.695036] 2188000.ethernet supply phy not found, using dummy >>>>> regulator >>>>> [ 0.697541] pps pps0: new PPS source ptp0 >>>>> [ 0.701333] libphy: fec_enet_mii_bus: probed >>>>> >>>>> --> [ 0.702005] fec 2188000.ethernet eth0: registered PHC device 0 >>>>> >>>>> >>>>> >>>>> Please run "make kernel_menuconfig" and check if CONFIG_FEC is >>>>> selected. >>>>> >>>>> >>>> >>>> Hi, the following were selected under drivers / ethernet >>>> >>>> [*] Freescale devices >>>> │ │ >>>> │ │ <*> FEC ethernet controller >>>> (of ColdFire and some i.MX CPUs) >>>> │ │ >>>> │ │ < > Freescale PQ MDIO >>>> │ │ >>>> │ │ < > Freescale XGMAC MDIO >>>> │ │ >>>> │ │ < > Gianfar Ethernet >>>> │ │ >>>> │ │ [*] Hisilicon devices >>>> >>>>> Kind Regards, >>>>> >>>>> Koen >>> >>> >>> Hi, >>> >>> Quickly checked a little more in-depth. >>> >>> (My board is a GW52xx.) >>> >>> Looking at dtsi, it seems that the fec part is not specified for the 552x >>> >>> As a test, could you add attached patch to your build? >>> Just put it in target/linux/imx6/patches-4.9 and do a full rebuild (make >>> clean; make) >> >> This board was working fine with LEDE in September? so im curious how >> a dtsi file would regress in a few weeks > > Thats the reason for the quick test. Forcing it (yes, I checked dtsi > history upstream. No, it didn't change) > Otherwise .. please identify the commit causing the regression ;) >>> >>> >>> Thanks, >>> >>> Koen > > _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
