Hi all, I'm trying to port lede to the dwr-512. I'm using the latest trunk downloaded with git clone https://git.lede-project.org/source.git
The dwr-512 oem bootloader accept a firmware image that shall be processed with a dlink tool called binboy and need the binary_kernel_image (lzma compressed) + the sqashfs_root. In addition, using the oem bootloader, I'm unable to pass kernel param and device tree. More detail here: https://wiki.openwrt.org/inbox/d-link/d-link_dwr-512_b in the section FW installation. I start some discussion in the bug report but I realize it is better to use the mailing list. According with the latest advice of Mathias Kresin I should use the default strategy to generate an Image, therefore I add the following path: diff --git a/target/linux/ramips/image/rt305x.mk b/target/linux/ramips/image/rt305x.mk index be21ac4..e830675 100644 --- a/target/linux/ramips/image/rt305x.mk +++ b/target/linux/ramips/image/rt305x.mk @@ -168,6 +168,13 @@ endef TARGET_DEVICES += dir-620-d1 +define Device/dwr-512-b + DTS := DWR-512-B + DEVICE_TITLE := D-Link DWR-512 B +endef +TARGET_DEVICES += dwr-512-b + + define Device/esr-9753 DTS := ESR-9753 BLOCKSIZE := 64k Then I add the dwr-512-b in the /target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh and in target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network and, clearly, I add the device tree file target/linux/ramips/dts/DWR-512-B.dts: /dts-v1/; /include/ "rt5350.dtsi" / { compatible = "ralink,rt5350-soc"; model = "D-Link DWR-512"; memory@0 { device_type = "memory"; reg = <0x0 0x2000000>; }; palmbus@10000000 { spi@b00 { status = "okay"; mx25l6405d@0 { #address-cells = <1>; #size-cells = <1>; compatible = "macronix,mx25l6405d", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; fast-read; partition@0 { label = "bootloader"; reg = <0x0 0x10000>; read-only; }; partition@10000 { label = "Kernel"; reg = <0x10000 0x140000>; read-only; }; partition@150000 { label = "rootfs"; reg = <0x150000 0x5c0000>; read-only; }; partition@710010 { label = "ui"; reg = <0x710000 0xe0000>; }; partition@7f0000 { label = "config"; reg = <0x7f0000 0x10000>; }; }; }; uart: uart@500 { status = "okay"; }; }; After the compilation in the bin/targets/ramips/rt305x/, I get: 2544 Oct 2 11:12 lede-ramips-rt305x-device-dwr-512-b.manifest 2892686 Oct 2 11:12 lede-ramips-rt305x-dwr-512-b-initramfs-kernel.bin 3145732 Oct 2 11:12 lede-ramips-rt305x-dwr-512-b-squashfs-sysupgrade.bin 1835008 Oct 2 11:12 lede-ramips-rt305x-root.squashfs 2891100 Oct 2 11:12 lede-ramips-rt305x-uImage-initramfs.bin 1201869 Oct 2 11:12 lede-ramips-rt305x-uImage.bin 5460316 Oct 2 11:12 lede-ramips-rt305x-vmlinux-initramfs.bin 5465328 Oct 2 11:12 lede-ramips-rt305x-vmlinux-initramfs.elf 3792868 Oct 2 11:12 lede-ramips-rt305x-vmlinux.bin 3797880 Oct 2 11:12 lede-ramips-rt305x-vmlinux.elf I do not seems that I get the kernel image I was looking for. It seems that I get the lede-ramips-rt305x-dwr-512-b-initramfs-kernel.bin but embedding the initramfs is not an option, the size is too big. Some advices? Thanks and bye. _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
