Dear All,
Today I reach an important milestone in " Adding support for dlink dwr-512":
BusyBox v1.25.0 () built-in shell (ash)
_________
/ /\ _ ___ ___ ___
/ LE / \ | | | __| \| __|
/ DE / \ | |__| _|| |) | _|
/________/ LE \ |____|___|___/|___|
lede-project.org
\ \ DE /
\ LE \ /
-----------------------------------------------------------
\ DE \ / Reboot (HEAD, r1727)
\________\/
-----------------------------------------------------------
root@lede:/#
Here is the complete bootlog:
Starting kernel @80000000...
[ 0.000000] Linux version 4.4.23 (lippo@nice) (gcc version 5.4.0 (LEDE
GCC 5.4.0 r1727) ) #0 Fri Sep 30 18:08:21 2016
[ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
[ 0.000000] MIPS: machine is D-Link DWR-512
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000000000-0x0000000001ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32
bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32
bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 8128
[ 0.000000] Kernel command line: console=ttyS0,57600
rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Writing ErrCtl register=00008d10
[ 0.000000] Readback ErrCtl register=00008d10
[ 0.000000] Memory: 28496K/32768K available (2773K kernel code, 127K
rwdata, 648K rodata, 156K init, 191K bss, 4272K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:256
[ 0.000000] CPU Clock: 360MHz
[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff,
max_idle_ns: 583261500 ns
[ 0.000000] systick: running - mult: 214748, shift: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 10618113593 ns
[ 0.000016] sched_clock: 32 bits at 180MHz, resolution 5ns, wraps every
11930464253ns
[ 0.015668] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
[ 0.090893] pid_max: default: 32768 minimum: 301
[ 0.100347] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.113437] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.136931] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.156782] pinctrl core: initialized pinctrl subsystem
[ 0.168534] NET: Registered protocol family 16
[ 0.217394] rt2880_gpio 10000600.gpio: registering 22 gpios
[ 0.228519] rt2880_gpio 10000600.gpio: registering 22 irq handlers
[ 0.243616] clocksource: Switched to clocksource MIPS
[ 0.256384] NET: Registered protocol family 2
[ 0.266738] TCP established hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.280625] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.293209] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.306075] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.317698] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.330709] NET: Registered protocol family 1
[ 0.349053] rt-timer 10000100.timer: maximum frequency is 3662Hz
[ 0.362894] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.375205] Crashlog allocated RAM at address 0x1f00000
[ 0.419466] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.431111] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME)
(CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.457061] io scheduler noop registered
[ 0.464867] io scheduler deadline registered (default)
[ 0.475467] ralink-usb-phy usbphy: invalid resource
[ 0.486505] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.501454] console [ttyS0] disabled
[ 0.508624] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20,
base_baud = 2500000) is a Palmchip BK-3103
[ 0.528334] console [ttyS0] enabled
[ 0.528334] console [ttyS0] enabled
[ 0.542123] bootconsole [early0] disabled
[ 0.542123] bootconsole [early0] disabled
[ 0.568380] spi spi0.0: force spi mode3
[ 0.576950] m25p80 spi0.0: mx25l6405d (8192 Kbytes)
[ 0.586889] 6 ofpart partitions found on MTD device spi0.0
[ 0.597884] Creating 6 MTD partitions on "spi0.0":
[ 0.607508] 0x000000000000-0x000000010000 : "bootloader"
[ 0.621807] 0x000000010000-0x000000150000 : "Kernel"
[ 0.635788] 0x000000150000-0x000000330000 : "rootfs"
[ 0.649501] mtd: device 2 (rootfs) set to be root filesystem
[ 0.661044] 0x000000330000-0x000000710000 : "rootfs_data"
[ 0.675774] 0x000000710000-0x0000007f0000 : "ui"
[ 0.688954] 0x0000007f0000-0x000000800000 : "config"
[ 0.708577] rt3050-esw 10110000.esw: link changed 0x00
[ 0.721105] mtk_soc_eth 10100000.ethernet: generated random MAC address
c6:bd:a8:72:d7:a2
[ 0.738908] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at
0xb0100000, irq 5
[ 0.756589] rt2880_wdt 10000120.watchdog: Initialized
[ 0.769623] NET: Registered protocol family 10
[ 0.786898] NET: Registered protocol family 17
[ 0.796143] bridge: automatic filtering via arp/ip/ip6tables has been
deprecated. Update your scripts to load br_netfilter if you need this.
[ 0.821452] 8021q: 802.1Q VLAN Support v1.8
[ 0.845658] VFS: Mounted root (squashfs filesystem) readonly on device
31:2.
[ 0.861526] Freeing unused kernel memory: 156K (80379000 - 803a0000)
[ 2.451549] init: Console is alive
[ 2.459024] init: - watchdog -
[ 3.703801] init: - preinit -
[ 4.724641] rt3050-esw 10110000.esw: link changed 0x00
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 8.255055] jffs2: notice: (284) jffs2_build_xattr_subsystem: complete
building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref
(0 dead, 0 orphan) found.
[ 8.289393] mount_root: switching to jffs2 overlay
[ 8.315605] urandom-seed: Seeding with /etc/urandom.seed
[ 8.401053] procd: - early -
[ 8.407241] procd: - watchdog -
[ 9.308977] procd: - ubus -
[ 9.555120] random: ubusd: uninitialized urandom read (4 bytes read, 15
bits of entropy available)
[ 9.574319] random: ubusd: uninitialized urandom read (4 bytes read, 15
bits of entropy available)
[ 9.592475] random: ubusd: uninitialized urandom read (4 bytes read, 15
bits of entropy available)
[ 9.611641] random: ubusd: uninitialized urandom read (4 bytes read, 15
bits of entropy available)
[ 9.629788] random: ubusd: uninitialized urandom read (4 bytes read, 15
bits of entropy available)
[ 9.648459] random: ubusd: uninitialized urandom read (4 bytes read, 15
bits of entropy available)
[ 9.667156] random: ubusd: uninitialized urandom read (4 bytes read, 15
bits of entropy available)
[ 9.686371] procd: - init -
Please press Enter to activate this console.
[ 10.135943] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.173158] Loading modules backported from Linux version
wt-2016-06-20-0-gbc17424
[ 10.188390] Backport generated by backports.git
backports-20160216-7-g5735958
[ 10.210948] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.240783] nf_conntrack version 0.5.0 (447 buckets, 1788 max)
[ 10.325466] xt_time: kernel timezone is -0000
[ 10.443111] PPP generic driver version 2.4.2
[ 10.457193] NET: Registered protocol family 24
[ 10.516693] rt2800_wmac 10180000.wmac: failed to load eeprom property
[ 10.529706] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading
EEPROM data from 'soc_wmac.eeprom'.
[ 10.549890] rt2800_wmac 10180000.wmac: Direct firmware load for
soc_wmac.eeprom failed with error -2
[ 10.568229] rt2800_wmac 10180000.wmac: Falling back to user helper
[ 10.653813] firmware soc_wmac.eeprom: firmware_loading_store: map pages
failed
[ 10.668689] ieee80211 phy0: rt2x00lib_request_eeprom_file: Error - Failed
to request EEPROM.
[ 10.685757] rt2800_wmac: probe of 10180000.wmac failed with error -11
[ 12.862054] random: jshn: uninitialized urandom read (4 bytes read, 20
bits of entropy available)
[ 13.016911] random: ubusd: uninitialized urandom read (4 bytes read, 20
bits of entropy available)
[ 13.035563] random: ubus: uninitialized urandom read (4 bytes read, 21
bits of entropy available)
[ 21.334581] device eth0.1 entered promiscuous mode
[ 21.344276] device eth0 entered promiscuous mode
[ 21.386394] br-lan: port 1(eth0.1) entered forwarding state
[ 21.397740] br-lan: port 1(eth0.1) entered forwarding state
[ 21.550873] br-lan: port 2(eth0) entered forwarding state
[ 21.561862] br-lan: port 2(eth0) entered forwarding state
[ 23.393736] br-lan: port 1(eth0.1) entered forwarding state
[ 23.553724] br-lan: port 2(eth0) entered forwarding state
[ 79.853694] random: nonblocking pool is initialized
And here the temporary patch:
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index c8b57ca..719078c 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -71,6 +71,7 @@ ramips_setup_interfaces()
dir-320-b1|\
dir-610-a1|\
dir-615-h1|\
+ dwr-512-b|\
firewrt|\
hlk-rm04|\
mac1200rv2|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index bb379f7..a0f041e 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -154,6 +154,9 @@ ramips_board_detect() {
*"DIR-860L B1")
name="dir-860l-b1"
;;
+ *"DWR-512 B")
+ name="dwr-512-b"
+ ;;
*"Dovado Tiny AC")
name="tiny-ac"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 0ef2308..36ea469 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -50,6 +50,7 @@ platform_check_image() {
dir-620-a1|\
dir-620-d1|\
dir-810l|\
+ dwr-512-b|\
duzun-dm06|\
e1700|\
esr-9753|\
diff --git a/target/linux/ramips/image/rt305x.mk
b/target/linux/ramips/image/rt305x.mk
index be21ac4..529727a 100644
--- a/target/linux/ramips/image/rt305x.mk
+++ b/target/linux/ramips/image/rt305x.mk
@@ -168,6 +168,17 @@ endef
TARGET_DEVICES += dir-620-d1
+define Device/dwr-512-b
+ DTS := DWR-512-B
+ KERNEL := kernel-bin | patch-dtb | lzma
+ IMAGES := factory.bin
+ IMAGE/factory.bin := \
+ append-kernel
+ DEVICE_TITLE := D-Link DWR-512 B
+endef
+TARGET_DEVICES += dwr-512-b
+
+
define Device/esr-9753
DTS := ESR-9753
BLOCKSIZE := 64k
diff --git a/target/linux/ramips/rt305x/config-4.4
b/target/linux/ramips/rt305x/config-4.4
index b8f6cda..dcf318f 100644
--- a/target/linux/ramips/rt305x/config-4.4
+++ b/target/linux/ramips/rt305x/config-4.4
@@ -132,9 +132,8 @@ CONFIG_MTD_M25P80=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
+# CONFIG_MTD_SPLIT is not set
+# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_MEDIATEK_ESW_RT3050=y
@@ -158,6 +157,7 @@ CONFIG_PHY_RALINK_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PRINTK_TIME=y
CONFIG_RALINK=y
# CONFIG_RALINK_ILL_ACC is not set
CONFIG_RALINK_WDT=y
And here the temporary device tree:
/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "ralink,rt5350-soc";
model = "D-Link DWR-512";
};
&spi0 {
status = "okay";
mx25l6405d@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "macronix,mx25l6405d", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <30000000>;
fast-read;
partition@0 {
label = "bootloader";
reg = <0x0 0x10000>;
read-only;
};
partition@10000 {
label = "Kernel";
reg = <0x10000 0x140000>;
read-only;
};
partition@150000 {
label = "rootfs";
reg = <0x150000 0x1e0000>;
read-only;
};
partition@330000 {
label = "rootfs_data";
reg = <0x330000 0x3e0000>;
};
partition@710010 {
label = "ui";
reg = <0x710000 0xe0000>;
};
partition@7f0000 {
label = "config";
reg = <0x7f0000 0x10000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
For sure I need to found the wmac.eeprom
dd if=/dev/mtdx of=soc_wmac.eeprom count=1
to fix the wifi and then I will slowly check the whole system.
Bye.
_______________________________________________
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
