Hi john, thanks for your encouragement. > congrats, please make sure to add a proper SoB line when you submit this. Can you please clarify me how to create and submit the patch? What means SoB?
> also the changes to the kernel config look out of place, please remove them > when submitting the patch The modification I do in the kernel configuration are not really "out of place" but them have a rationale. Indeed it seems that the oem bootloader perform an integrity check on the area allocated for the kernel + squashfs. If something else is written in this area I get this error: Jboot B394 JRecovery Version R1.2 2011/05/26 09:53 === 0xB0100004 = 00000000 SPI FLASH: MX25l6405d 8M CSID 6E20->6E24 ...Rootfs CRC Error! BCD84A9E 992C3587 And the bootloader prevent to proceed. This append when the squashfs is immediately appended to the kernel image and this is the reason why I removed the > -CONFIG_MTD_SPLIT_FIRMWARE=y > -CONFIG_MTD_SPLIT_SEAMA_FW=y > -CONFIG_MTD_SPLIT_UIMAGE_FW=y It also seems that the area allocated for the kernel + squashfs is fixed and limited (I'm currently running near the limit), therefore I need to have a minimal configuration in the kernel and squashfs. In any case I'm considering now unstable the patch. I prefer at least verify the networking and wifi functionality to submit the first patch and after a second one to enable the 3G modem (I hope !!!). Bye. _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev
