>>Hello all, >> >>trying to check that the SMDR is accessible on my KX-TD816. I'm using >>a null-modem cable - and have checked the pinouts are all okay. The >>Pconnector. modems will, you might check that you selected the right srogram for SMDR (800) is running and set to record all outgoing >>calls. I've plugged into the RS-232 interface, and conected (for a >>test) via Hyperterminal. I'm not using any modem initialisation >>strings. >> >>I can see that I can connect, (@9600, 8-N-1) as I can send the command >>ATZ and get an 'OK' response back. However... no SMDR produced? >> >>Any ideas? >> >> >> >the 816 will not give you an OK for an atz command on the serial >connector. modems will, you might check that you selected the right >serial port on your pc. > >on later ksus, about 10 seconds after connecting the cable, you will get >a modem init string from the ksu, then three lines of page title before >the smdr lines. but there has to be detail waiting to print. > >unless i mis-understand what you are trying to do. > >-larry / dallas
Larry, I have to admint I was using one of those awful USB to Serial convertors on my laptop - so it's entirely possible I've connected someplace I didn't expect to. I'll dig out an old laptop with windows 95 (shudder) and a serial port and try again. -- Russ _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
