Russ Hay wrote: >Hello all, > >trying to check that the SMDR is accessible on my KX-TD816. I'm using >a null-modem cable - and have checked the pinouts are all okay. The >Program for SMDR (800) is running and set to record all outgoing >calls. I've plugged into the RS-232 interface, and conected (for a >test) via Hyperterminal. I'm not using any modem initialisation >strings. > >I can see that I can connect, (@9600, 8-N-1) as I can send the command >ATZ and get an 'OK' response back. However... no SMDR produced? > >Any ideas? > > > the 816 will not give you an OK for an atz command on the serial connector. modems will, you might check that you selected the right serial port on your pc.
on later ksus, about 10 seconds after connecting the cable, you will get a modem init string from the ksu, then three lines of page title before the smdr lines. but there has to be detail waiting to print. unless i mis-understand what you are trying to do. -larry / dallas _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
