Great. Then I'd just have the device dial 9 or 9[pause] to get an outside line and the KX-TD system would do the normal hunt for an idle CO line, the same as if it were connected to an XDP port? I plan on using this only for an outgoing fax server and would like to have access to all of our lines.
Just out curiosity, and somewhat unrelated... What happens if you put a phone or device on a CO line before the line enters the KX-TD? Can the KX-TD deal with it and just see it as an unavailable line whenever the line is in use, or would this cause problems? ----- Original Message ----- From: "Michael Karaman" <[EMAIL PROTECTED]> To: "'Jim McAtee'" <[EMAIL PROTECTED]>; <kxt@kxthelp.com> Sent: Tuesday, April 19, 2005 6:32 PM Subject: RE: KX-T: Use analog pair without phone set? > The phone is just a pass thru of the red/green (blue/white) pair. > Change > the punch down at the KSU. > > > Michael Karaman > President The Phone Network, Inc. > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf > Of > Jim McAtee > Sent: Tuesday, April 19, 2005 8:28 PM > To: kxt@kxthelp.com > Subject: KX-T: Use analog pair without phone set? > > > Can you connect a device such as a fax machine to the analog pair of a > KX-TD1232 extension without going through the XDP port of a digital > phone? > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
