320 - all external pagers 330 - all page groups 32<n> - n= external pager number (1 for KX-TD816 /1 through 4 for KX-TD1232) 33<n> - n= page group (1-8)
32* or 33* - pages everything The floating numbers (196, etc.) are only used for feature access, like from a DISA call, etc. HTH, Michael BTW, you should be able to hook the Valcom speaker to a walkman or other audio source to insure it works by itself. Mike Wasilewski told me on 4/15/2005 14:54: > I just connected a Valcom 1030C horn speaker to paging port 1 on a KX-TD > 1232-6. I cannot get this to work. > > I am using icm 330 to try and page via the new speaker. Is this > correct? In the programming, under Musinc and Paging, it shows External > Paging 1 as Ext 196. If I try using Ext 196, I get "Invalid" > response. Does the 1232 need to be restarted when connecting a new paging > device? > > The Valcom 1030C has a built in amp and volume control. I have the volume > there set at about 1/2 or slightly higher. The cable run for the power > supply is only about 20 ft. The run for the connection to the 1232 is > about 120 feet or so. This speaker was purchased used but according to > owner, it was working when removed from warehouse. I had to purchase the > power supply for it. > > Mike Wasilewski > Five Star Services, Inc. > Tele 770-924-9156 > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
