At 10:01 AM 8/14/2002 -0700, John Bell wrote: >Thank you very much for the prompt replies and the neat workaround. > >However, as it turns out there is an easier way. My problem was not with >the TVS50 (Dead Wrong in Public Again (tm)) but rather that the dash 4 and >dash 5 816's require field 36 in program 990, System Additional Information, >to be set to 0 (enable) to enable follow on ID on IRNA transfers. > >I found this after I posted by spending a few hours looking through old KXT >digests using the web search and found a posting by Randy Dell in the >October 2000 archive. > >By the way, I'd love to know where to find the instructions from Panasonic >to convert the TVS-50 into a answering machine with a single mailbox.
And you are asking this becuase you believe in miracles????? It's fairly easy. I start with custom service 30 D zero I have no idea why, and record a prompt. Then I go into the delete prompts and kill 817 (or is that 819) and 248,249 and 250. Now I go into the TVS and tell it to use User Prompt 1 and CS 30 for all cases/day/night/lunch/break. Then you edit CS30 for no digits allowed and specify which mailbox you want it to go to (actually you just direct digits 1-0 to a mailbox). Oh yeah, find that annoying prompt about leaving a message and pressing all those digits to replay etc etc and make that one go away too. HTH Carl Navarro _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
