I assumed this was normal for either the Pano or Dmitry tool. Even -1 uploads. Unplug/plug the sets or power down/up seems to send the new config to the sets for the LAMPS. Everything else works immediately on upload.
Also, pressing the "dumbed" button, or system activity with the associated CO/EXT, seems to bring it back to life too. Dual cab systems can be strange too, we have had a feature or button "dissappear" at a set during the day, and next morning work just fine. The 1:00 AM resync seems to catch "lost" features. (one of those twice a year type service calls) -larry --- Bob Guindon <[EMAIL PROTECTED]> wrote: > I've experienced this problem with a number of > KX-TD816-4 and KX-TD1232-4 (I > haven't experimented with -5 yet) systems. I found > that, immediately after > performing batch programming using the E1232A.EXE > software, the message > waiting keys that were programmed on flexible > buttons wouldn't always work > correctly. More specifically, if a new message was > left in the mailbox, the > light would not be lit, but the button would > function to retrieve the > message, as if it were lit. After some > experimentation, I found that if I > power the system down (or use the reset button) > after performing batch > programming, that the lights seem to work fine > afterwards. It is a little > bit of a pain to have to shut the system down after > batch programming, > though. > > I know that some of the -4 feature enhancements > require that you reset the > system after programming, but I don't recall that > flexible message waiting > lights was one of the features that required this. > > Bob > > -----Original Message----- > Hi.... > > Great little forum here... Hopefully someone can > help > me with a little problem I have. I setup a phone so > that 3 dss buttons were setup as Message waiting > lights for 3 mailbox's. But the lights wont turn on > and off. If I unplug the phone and plug it back in, > the lights will show correctly but they dont turn on > or off without having to unplug the phone. I have > tried reseting the system and reprograming with the > same results. I am running a kx-td1232-4 system. > Any > help would be appreciated. > > Thanks! __________________________________________________ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/ _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
