Getting ready to install the plywood firewall and need additional info. Should the plywood be cut a bit smaller than the actual size of the boat framing to facilitate being able to make a smooth transition from fuselage sides to the cowling sides ? What about where the glareshield meets the back of the firewall ?
Also does the metal wrap around the edges of the plywood or just extend to the perimeter of the plywood ? I have spent much time searching the archives and found the index that listed several issues of the newsletter regarding this, however after going thru the newsletters I cannot find the ones I apparently need which are Jan 1992, Nov 1989, Feb 1982, and Feb 1990. I have also looked at lots of pictures on builder's sites without being able to see exactly how it is done. I must be over thinking this one. If anyone has pictures(worth a thousand words) I would be very grateful because this item has stopped production and I am losing my hair anyway so more head scratching is totally counterproductive. Thanks in advance Jim Litchfield S.E. Virginia ________________________________ -Please see LIST RULES and KRnet info at http://www.krnet.org/info.html -Change list delivery options at https://list.krnet.org/list/krnet.list.krnet.org/ Affinity List Info Board -Search recent KRnet Archives at https://list.krnet.org/empathy/list/krnet.list.krnet.org/ -Search John Boyea's decades of archive at https://www.mail-archive.com/krnet@list.krnet.org/
