Hi all, Thank you so much for the valuable information. I really appreciate your feedback.
Kind regards, Hennie -----Original Message----- From: KRnet [mailto:krnet-boun...@list.krnet.org] On Behalf Of bruis--- via KRnet Sent: Sunday, 28 May 2017 1:21 AM To: Mark Langford via KRnet <krnet@list.krnet.org> Cc: br...@xtra.co.nz Subject: KR> N 133RM wings For the record, the Roy Marsh KR2S wings measure 7’3” from hinge bolt hole to tip, with almost full width aileron...9” shorter than the wing. They are somewhat tapered, to my surprise. Tape shows 4’ wide at the hinge plane, and 35” at the tips, which are upturned slightly at the trailing edge. Can’t say much about the airfoil section but they are exactly 6” thick at thickest point at root. Of course, it is possible that they are not as original, but I think they are. _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
