I just retired N40WS KR-2 and have a nice Cowling, Canopy, Diehl tri gear and a lot of hardware for the controls. Drop an email if interested. januaryd...@gmail.com
On Wed, May 10, 2017 at 6:32 PM, Larry Flesner via KRnet < krnet@list.krnet.org> wrote: > > > I was at the airport today and in light of our recent discussions on push > rods, I measured my aileron push rods. My rods measure 1 5/8" between the > lock nuts. A threaded rod approx 3 inches in length should work so a bolt > in the > -30 size should be about right. This is ballpark so make to fit your > airframe. That would make a push rod cost just under $10 each. > > Larry Flesner > > > _______________________________________________ > Search the KRnet Archives at https://www.mail-archive.com/k > r...@list.krnet.org/. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options. > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org > _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
