Another item worth mentioning if spars must be removed from the fuselage
is to use a very thin "japanese flush cut" handsaw or an "oscillating
multi-tool", such as shown at
https://www.youtube.com/watch?v=Y6PxdTlROQM . This tool is perfect for
cutting the spars away from the fuselage verticals without removing a
lot of wood in the process. And the large flat cutting blade surface is
"self-guiding" to some extent. This is not what I'd use to remove the
plywood facing, just to cut the spars completely out of the fuselage if
you have to. This thing costs $18 at Harbor Freight, and has more uses
than first meets the eye.
http://www.harborfreight.com/oscillating-multi-tool-68861.html
Mark Langford
m...@n56ml.com
http://www.n56ml.com
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
