Proseal 'cures' to a rubbery substance, not a hard one like epoxy. Before it cures, it's the 'adhesive from hell' - sticky, gooey mess that gets on everything, intended workpiece or otherwise, and stinks to hell & back....
One of the messiest jobs I can remember, was replacing the cockpit windows on an OH-58. They are attached with proseal and rivets. On 11/21/2011 1:20 AM, Rodger wrote: > Thanks all, I think I found my answer. According to an article on Van's > website, it will take up to 3-4 days for it to cure tack free and another 2-3 > days for it to fully cure. What a pain....! Note to self: Get tanks welded on > next project. > Rodger > > Sent from my iPhone > > On Nov 20, 2011, at 11:27 AM, Rodger<bandenok...@gmail.com> wrote: > >> FYI: I mixed the entire 1 pint resin and hardener (100/10 mixture) while >> working in about 65 degrees ambient temp. >> Rodger >> >> Sent from my iPhone >> >> On Nov 20, 2011, at 10:09 AM, Rodger<bandenok...@gmail.com> wrote: >> >>> Netters, >>> Is Proseal supposed to harden like epoxy or is it supposed be a gooey tar >>> like mess? I used the two hour stuff on my first tank, yet it has not set >>> up. I tried a heater after 12 hours and it just runs more. What can I do to >>> fix this? >>> Rodger >>> bandenok...@gmail.com >>> >>> >>> Sent from my iPhone >> _______________________________________ >> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >> please see other KRnet info at http://www.krnet.org/info.html > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
