Dan, I was thinking of a gap seal for the aileron. For my latest project I made a test set of Hor. Stab and elevator, using a piano hinges on the top surface...which is a flat plane. I did the tapering, 1 7/8 to 5/8 on the underside. The elevator spar is beveled to allow 25 degrees down play. I do not anticipate any loss of performance with this save for the less than desireable gap on the bottom surface, much like the aileron gap. This is what I want to minimize. Pat ----- Original Message ----- From: "Dan Heath" <da...@windstream.net> To: "'KRnet'" <kr...@mylist.net> Sent: Monday, July 18, 2011 8:36 PM Subject: KR> Wing Gap Covers
> You may be interested in this method. > > > > http://krbuilder.org/WingGapCovers/index.html > > > > > > See N64KR at <http://krbuilder.org/> http://KRBuilder.org - Then click on > the pics > > See you at the 2011 - KR Gathering in Mt. Vernon, Il - MVN > > There is a time for building and it never seems to end. > > Daniel R. Heath - Lexington, SC > > > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
