I' planning on a veil did you use one? -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Mark Langford Sent: Friday, February 04, 2011 4:06 PM To: pharri...@penumbradesign.net; KRnet Subject: Re: KR> Lay-up
Phillip Harrison wrote: >>I bought a KR2 kit and plan to use an epoxy with a 4.8 oz BID CF/Aramid. Maybe I'm wrong. But this seems like a pretty good idea. << I'm guessing you've never actually used Kevlar. The stuff is very diffiult to cut, but the killer is that it's virtually impossible to sand. It just frizzes up and creates a fuzz on the surface every time you sand through to a stray strand. You spend all your time trying to hide it again, only to sand into it again and again. I used carbon fiber with a single Kevlar tracer, and that one simple thread still gives me a very bad taste for the stuff... Mark Langford ML at N56ML.com website www.n56ml.com _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
