Aviation is an amazing world. Put you tube in and air it up then take the core out and slip the half on , if you use a little powder seems to work almost all the time. A point for an AP. la...@lebanair.com
-----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Dan Heath Sent: Friday, April 16, 2010 2:58 PM To: 'KRnet' Subject: KR> Wheel woes I got my new bearings today, and putting them in was fairly easy. At first they did not fit the axle, even they measured as though they should. A little buffing with some 220 solved that problem. However, I tried the Clorox bottle and the light cardboard and neither would work. In fact, I still ended up pinching a hole in the tube. So I have 3 tubes left and if I go through those, I will have to go to some different wheels. This is insane. Why would anyone ever design a wheel like this, to go on an airplane, setting everyone up for failure from the start. I am up to four tubes shot, now. I should be flying, instead, I am screwing around with something that should be a no-brainer task. Daniel R. Heath da...@windstream.net See N64KR at <http://krbuilder.org/> http://KRBuilder.org - Then click on the pics See you at the 2010 - KR Gathering in Richmond, Ky - I39 _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
