Why not just repair your old wheel by putting in new bearings and cast a Polly Urathane tyre. If I could post a photo I can show you mine. Regards Willie ----- Original Message ----- From: "Rich Seifert" <rseif...@socal.rr.com> To: "KRnet" <kr...@mylist.net> Sent: Saturday, November 18, 2006 6:37 AM Subject: KR> Tail Wheels
> It's nearly Annual Inspection time and my baby needs a new tail wheel. I have been using a wheel sold by Dan Diehl, but he no longer sells it. It was a 3.5" hard rubber tread on an aluminum core using roller bearings and has held up nicely compared to all the other wheels I've used. I've been using it for about 4 or 5 years. Does anyone have a recommendation for a really good 3.5 to 4.0" diameter by 1.5" wheel. I looked through McMaster Carr and ACS without finding anything that I thought would work well. I would like ball or roller bearings with an aluminum core and hard rubber tread. > Thanks > Rich Seifert KR-2 N56SR > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
