Bob: tried to get you off net but it always gets bounced.. Please contact me at asir...@702com.net Thanks Russ ----- Original Message ----- From: <bearlk...@aol.com> To: <kr...@mylist.net> Sent: Saturday, September 09, 2006 6:40 AM Subject: KR> astro gear
> Kr builders, > I am getting some queries for more info on the Astro spring idea. Here are > the dimensions > of the spring- > length= 56" > width= 3.5" tapers to 2.75" at the center, then flares back to 3.5" at the > other end. > thickness=5/8" > The spring has a bow to it so if it is set on the floor the center is approx > 5" off the floor. > Please remember that I have not tested this idea or verified that anyone has > even flown it. > If you buy a set, be carefull using heat (cutting torch or abrasion) to take > them apart > heat will degrade the epoxy! > Bob Polgreen > Boat and parts > Nowthen MN > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
