Don, Use an adjustable hand reamer. It's lots quicker, and your holes will stay round.........Bobby
> Virgil: > > I am back to the Dowel & Emory paper sice the WAF's are already insyalled > on > the closed up wing I can not even use a hand drill let alone a drill press > so > this will take a while. I already had the wings on with ordinary bolts so > I > know they fit that way but they only go on the 1st half of the grip of the > bolt at most. > > Thanks > > Don > ------------------------------------------------------------------------ > > VIRGIL N SALISBURY wrote: > >> Drill the bolt holes undersized then ream. You do one at a time, >> KEEP >> the reamer square to the work. Put it in the drill press and hand turn. >> Lubricate >> well, Virg >> >> On Fri, 5 May 2006 23:00:49 +1000 "Chris Johnston" >> <chr...@ozdocs.net.au> >> writes: >> > I am on the scrounge for parts, I need some undercarriage >> > fittings, the Diehl ones for fitting to the spars, if anyone has an >> > old or disused set I would be interested, is the length of the kr2 >> > gear legs the same as the length of the kr2s, and can you make the >> > legs from Aluminium, failing all that, it might be safer just to buy >> > the complete Diehl gear set and be done with it, and yes, I have >> > been very bad in that I have not checked the archives on this. >> > I am also wanting wing attachment fittings, I would think it >> > would be pretty easy to make thses at home, send a cad file to the >> > CNC water jet guy and have them cut out, I am told they can do them >> > here to +/- 2 thou, will the bolt holes need reaming? and what s the >> > best way to do this, fit them in a jig and do them all in one or do >> > them individually????? Any advice greatly appreciated, and yes, >> > again, I have not checked the archives. >> > >> > >> > >> > >> > >> > Chris Johnston >> > >> > North Richmond >> > >> > Australia >> > _______________________________________ >> > Search the KRnet Archives at >> > http://www.maddyhome.com/krsrch/index.jsp >> > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >> > please see other KRnet info at http://www.krnet.org/info.html >> > >> > >> >> Virgil N. Salisbury - AMSOIL >> www.lubedealer.com/salisbury >> Miami ,Fl >> >> _______________________________________ >> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >> please see other KRnet info at http://www.krnet.org/info.html > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
