Jack, I had 2 different cg calculations done by two different A & P's using two different datum points and the results came out within 1/4 inch of each other. These calculations came out to be approximately 1 inch from the front limit of the cg envelope. (9 inches from front edge of wing) Bill Page boliverp...@bellsouth.net
----- Original Message ----- From: "Jack Cooper" <kr2coo...@earthlink.net> To: "KRnet" <kr...@mylist.net> Sent: Thursday, March 30, 2006 11:22 AM Subject: RE: KR> cg with Deihl wing skins > Bill > > Have you had someone else review your W&B figures?? A double check of the > figures with different eyes may be very helpfull. This is an important > issue and a review of the figures wouldn't hurt. > > Jack Cooper > > >> [Original Message] >> From: countryhomeprint <countryhomepr...@bellsouth.net> >> To: KRnet <kr...@mylist.net> >> Date: 3/29/2006 9:16:41 PM >> Subject: KR> cg with Deihl wing skins >> >> Recently the first flight was made in 880AB. As with most any > experimental aircraft a few problems occur. Question? Is the cg range for > Dan Deihl wing skin wings the same as for the standard KR-2 wings? > N880AB's > cg falls within the limits for the standard KR-2, however my KR feels tail > heavy. I am unable to establish a true stall due to the uncontrolled > pitching up of the wings prior to stall. It feels as if the horizontal > stab > and elevator are stalling prior to the wings. This happened during the > first stall approach and a stall approach will not happen again until the > problem is solved. Has anyone experienced this? Anyone have a thought as > to > WHY. This could be a dangerous situation. >> >> Bill Page >> boliverp...@bellsouth.net >> _______________________________________ >> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >> please see other KRnet info at http://www.krnet.org/info.html > > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
