Leave some foam for strength, Virg On Mon, 27 Mar 2006 20:07:02 -0600 D F Lively <riksh...@interl.net> writes: > Listees: > > Does anyone have the actual specs on the FG resins used in the KR > that > will not attack the foams that they use. Also the Specs on the > foam > used in the kits. I am not talking about generic names and > densities > but ASTM numbers if any one has them. That will go along way for me > to > find local sources. > > I am in the position of making a 3-/2 gal header tank 8" wide x > 10" > long x 8" deep instead of the premolde cowl tank shell. Will have > a > mech fastened & gasketed cover with all the vents, tank > interconnections > & filler in the lid and a low point feed to the engine, tank Drain > & > sight glass in the bottom. > > I plan on forming the tank up with florist foam blocks and covering > them > with Poly-ethylene bags or better yet Poly-Vinyldene film( Stretch > & > Seal wrap)and then lay up the tank on the form. When it is cured > take > the foam out and test shell for leaks. > > Opinions? Suggestions? > > Don > > > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > >
Virgil N. Salisbury - AMSOIL www.lubedealer.com/salisbury Miami ,Fl
