......It is starting much, much easier with it set at about 25 degrees. We reset it today just to check. So we are leaving it at 25. While taxing around at lower speeds there is also some little roughness with the electronic ignition at the lower speeds. It does seem to smooth out at higher RPM. We are going to check it out one day after work and may set it up a little closer to 25 also.
It is going to take a lot of realtime tweaking. I don't think we can set back and just analyze it and set it and get it perfect. It will take quite a bit of tweak and test...... I guess this is what it is all about anyway..... Will someone please give me a reply to let me know if these posts are making it to the Net.....? Keep on keeping on, On 11/5/05, Brian Kraut <brian.kr...@engalt.com> wrote: > > I believe GP recommends 28 degrees BTDC. That will fire the mag 3 degrees > BTDC which should not give you any starting problems. > > Brian Kraut > Engineering Alternatives, Inc. > www.engalt.com <http://www.engalt.com> > > -----Original Message----- > From: krnet-bounces+brian.kraut=engalt....@mylist.net > [mailto:krnet-bounces+brian.kraut=engalt....@mylist.net]On Behalf Of > Jerry Mahurin > Sent: Friday, November 04, 2005 11:35 PM > To: KRnet > Subject: Re: KR> Timing the Mag > > > .........OK Netheads I have one for you on the mag timing issue..... > > If you have a mag with a built in lag of 25 degrees and you time it at 29 > degrees BTDC is the impulse gonna fire it at 4 degrees BTDC when trying to > start.....??? > > Right now I think that is our situation. If it is we will have to time the > mag at 25 degrees so it will start easier..... No big deal, just a little > loss in efficiency.... > > Whadda U think.......... > > Jerry Mahurin - aka - KRJerry > Lugoff, SC > > > On 11/4/05, flymaca711...@aol.com <flymaca711...@aol.com> wrote: > > > > HI ALL DAN NO STALLING GO TO THE GREATPLANE SITE AND YOU CAN PRINT A > COPY > > HOW TO TIME IT. YOU CAN ALLSO PRINT THE DISC SO YOU CAN DEIAL IT IN > > BEFORE YOU CHECK IT WITH BUSS BOX OR LIGHT. IF YOU DO IT RIGHT YOU WONT > > HAVE TO MOVE THE MAG ADVANCE OR DEADVANCE. YOU WILL BE RIGHT ON THE > MONEY. > > _______________________________________ > > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > > > > -- > Jerry Mahurin - aka - KRJerry > Lugoff, SC 29078 > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > -- Jerry Mahurin - aka - KRJerry Lugoff, SC 29078
