..........net................ Did my post to the net make the trip last nite.......... It was comments on our mag timing efforts............ Maybe I have a bad net connection..............
Someone please respond if they receive this............. On 11/5/05, Larry Flesner <fles...@verizon.net> wrote: > > > > > > >Those of you that have hung your rudder pedals from the shelf in stead > of > > >mounting them on the floor. Were you happy with the height above the > floor > > >that the horizontal made (the bit that your foot rests on)? > > >Dene Collett > >+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >Check out: > >http://home.hiwaay.net/~langford/flesner/brakes1.jpg > >Larry Flesner > > > >+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > > One additional note on my brake setup. I'm tall, 6' 4", and that puts my > feet on the pedals at a rather flat angle. That caused me to drag the > brakes when I don't intend to even though I moved the fixed pedal > back from the toe-brake pedal with some washers. My fix was to > add a piece of wood trim called "half-round" to the top of each fixed > rudder pedal so I must roll my foot a bit more to actuate the toe-brake. > I think I used 1/2" thick stock and applied it with JB Weld. > > I love my set-up and haven't had a single problem with it in the 180 hours > to date. I do wish I had 3 or 4 more inches of leg room though. > > Larry Flesner > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > -- Jerry Mahurin - aka - KRJerry Lugoff, SC 29078
