well I layed up the fiberglass with polyester resin... The "spine and ribs" do not look like its going to be an issue... but what I do see as an issue is when I layed the mylar over the mold ... there are subltle dips and hills because of the uneveness of the plastic. The cloth followed the contour of the plastic. I do not believe its going to bad enough to rip it off and spend another 100 bucks and start over.
I guess I am going to become cozy with bondo... UGGG!!.. -Jeff >From: "Dan Heath" <da...@alltel.net> >Reply-To: KRnet <kr...@mylist.net> >To: <kr...@mylist.net> >Subject: Re: KR> Turtle deck advice >Date: Tue, 12 Jul 2005 17:37:21 -0400 (Eastern Daylight Time) > >That is what I would do and it should be quite easy. Cut a long triangle >shaped piece out of foam and hot glue it to the inside and glass it. > >See you in Mt. Vernon - 2005 - KR Gathering >See N64KR at http://KR-Builder.org - Then click on the pics >There is a time for building and a time for FLYING and the time for >building >has expired. >Daniel R. Heath - Columbia, SC >-------Original Message------- >I may be able to create some type of hat >out of foam and glass it after I pull the piece off. >_______________________________________ >Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >please see other KRnet info at http://www.krnet.org/info.html
