Should I consider resealing the bottom with VE??? Orma -------- Epoxy will stick, to V/E but not as well as V/E will stick to it's self.. Personally I would remove all the epoxy if possible, sand well, and repair with V/S resin, you can add M/balloons as a filler, place normal cloth as you would with Epoxy. then to be sure of not have any pin holes , Pour some in from the top and move the tank around and watch the resin move over the repaired area, and let set. Beautiful.
Only my opinion, but I added extra seal in my wing tanks by placing the wing at the required angle and ran V/E through the fuel inlet, along the top four edges to seal, one edge per day. it gets into all those corners that may have been mossed. Phillip Matheson mathe...@dodo.com.au Australia VH PKR See our engines and kits at. http://www.vw-engines.com/ http://www.homebuilt-aviation.com/ See my KR Construction web page at http://mywebpage.netscape.com/FlyingKRPhil/VHPKR.html Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
