Rich
My name is John J Byrnes Jr. I live in Lebanon Ct. 06249. In the past as
part of my job I did a lot of work on choosing powder coating equipment, and
powdercoating vendors. My opinion is you get what you pay for.
First the most important thing in powder coating as any painting process is
clean parts. That said the system you are talking about is probably just the
application gun. You will need a heat source to cure the powder. There some
problems in powder coating known as the faraday cage effect, where you will not
get a consistent coating thickness.
After all my research I opted to vend the process out. One of my projects
was to find a vendor for black rinkle finish for Harley Davidson, I finaly
found one but it was tough. I hope I do not sound to negative, but for the
small amount of powder coating you need I would find a good vendor. Also if you
only have a few pieces that would be to small to meet the minium charge join
with someone else needing powder coating.
I hope I helped you out, if you have any questions I will see if I can
help you out.
JJB
rparker <rpar...@wwhotspots.com> wrote:
FYI,
Just saw an ad for a powder coating system for $89
75 high temerperature paint colors available.
http://www.hotcoat.com
Rich Parker
Peterborough, NH
_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
please see other KRnet info at http://www.krnet.org/info.html
