Long series drill bits? And you need one within three days? Look in the yellow pages for Industrial Supply Houses in your area, call local machine shops and ask where they buy theirs or borrow one of theirs. Finally as someone else has suggested, make a drill jig,..can be made in a half hours time using 5 minute epoxy. ----- Original Message ----- From: "Robert L. Stone" <rsto...@hot.rr.com> To: <kr...@mylist.net> Sent: Tuesday, October 05, 2004 4:47 PM Subject: Re: KR> 3/16 lomg series drill
> Dene, > > Aircraft Spruce & Specialty has what you need. Look in their current > catalog on page 520 top left of the page "12 inch long drill bits". You > wrote: > > > > "I want to install the WAF > s this weekend and install the > > spars in the fuselage > permanently". > > > > Install the wing stub spars first then the WAF's. The center spar > should fit so close that if you install the WAF's first, you will not be > able to slide the center spar into the fuselage. > > > > Bob Stone, Harker Heights, Tx > > rsto...@hot.rr.com > > > > > > -------Original Message------- > > > > From: KRnet > > Date: 10/05/04 15:26:01 > > To: krnet > > Subject: KR> 3/16 lomg series drill > > > > Hi again guys > > This is for the South African builders out there. > > For the life of me I cannot source a 3/16 long series drillbit anywhere in > > Port Elizabeth. Do any of you guys know where I can get such an animal? I > > amm desperate, I want to install the WAF's this weekend and install the > > spars inthe fuselage permanently. > > Thanks > > Dene Collett > > KR2S-RT builder > > Port Elizabeth > > South Africa > > mailto: dene.coll...@telkomsa.net > > P.S: checkout www.whisperaircraft.com > > > > > > > > > > _______________________________________ > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
