>Hi Netters, > I want to buy, or complete a KR2S project that has been "STRETCHED" as >follows: 4" forward of the front spar, 14" aft of the rear spar, cabin >width of 40" (inside), and raised 3". Are any available? >Dick Goff dcg...@webtv.net +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
If you find a used KR "exactly" as you want as stated above, I want you to buy me a loto ticket. :-) The only way to find a KR "exactly" as you want is to build it that way. Someone recently mentioned a 9 inch stretch forward of the spar. Unless they are using a very light engine or a very short mount, which will make the engine less servicable, I'd say 9 inches is a bit much for W & B. I'd suggest that builder compare their numbers to some "flying" KR's. Tail heavy is not good but you can go too far nose heavy also. Larry Flesner
