Thanks Larry, your insight is always appreciated, I was trying to think if the S could mean something else as I did not want to untune it or something. What I really need to do is ty it down and run it at full throttle and then set it. After 2500rpm is where the ign noise starts.Live and learn---IKS NAY to auto plugs!!-----------------------Kenny
On Sat, 10 Jul 2004 16:18:26 -0500 larry flesner <fles...@midwest.net> writes: > >Can anyone familiar with the TKM MX11 radio tell me what the > procedure is > >to adjust the squelch. The radio does have auto squelch but I've > got some > >ign noise that is right on the border, just the slightest increase > in > >squealch would eliminate it. On the front of the radio there are > several > >adjustments and one has an S, is that the control and if so what > >direction should I turn it??? Thanks to those who reply!! > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > I think that's what I have installed in the Tripacer. I adjusted it > when I > installed it and haven't had to touch it again. I adjusted mine > without > the engine running but if you have engine noise you'll have to > adjust > with the engine started. The S is squelch and the other I think is > for brightness or something. > > Turn the S (probably counterclockwise) until you get background > noise and then the opposit direction to silence, just like a > squelch knob on any other radio. Just make sure you adjust > while no signal is being received (no one talking). Using a > close but unused frequency will make the job easier. > > Good luck. Those are great radios. > > Larry Flesner > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > ________________________________________________________________ The best thing to hit the Internet in years - Juno SpeedBand! Surf the Web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to sign up today!
