Not trying to argue with you Mark but if I remember right my KR2S plans say
for a larger cockpit than the KR2. I will be looking at those plans real
soon to double check. I have the 1992 S plans.
Off the topic but....... are there any tricks to the boat with the
plywood already installed to releive tension? I put it in the jig then wet
it with water. The next day I started to bring in the sides to the
dementions, it;s been sitting that way for 3 days, with me giving it water.
Would this be proper or is there better ways of doing this?
Justin
----- Original Message -----
From: "Mark Langford" <n5...@hiwaay.net>
To: "KRnet" <kr...@mylist.net>
Sent: Thursday, May 06, 2004 9:43 PM
Subject: Re: KR> flight report
> JW wrote:
>
> > The KR2 is 34" (I think) while the S is 36". A KR2 firewall template and
> > KR2S template are different so their must be a difference.
>
> They're the same width in the area of the spars (where you sit). The one
> thing that needed stretching the most didn't get stretched!
>
> Mark Langford, Huntsville, Alabama
> N56ML "at" hiwaay.net
> see KR2S project at http://home.hiwaay.net/~langford
>
>
>
> _______________________________________
> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net
> please see other KRnet info at http://www.krnet.org/info.html
