One needs to shutdown the pump with a level switch or manually to keep it from heating the windings above normal operating temperature. I know, some pumps have a internal by-pass but that just uses up battery power.
KRron ----- Original Message ----- From: "Mark Langford" <n5...@hiwaay.net> To: "KRnet" <kr...@mylist.net> Sent: Sunday, February 08, 2004 11:15 AM Subject: Re: KR>Facet Pump test. > Mark Jones wrote: > > >>The pump did quiet down considerably but is still very noticeable. When I > closed the fuel valve and allowed the pressure to build, the pump did not > shut off as someone had mentioned it would do. << > > I suspect that Colin's is the round rotary type, while ours is the square > pulsing type. His hums, while ours clicks. Even deadheaded, our type > continues to click, although slower than running at full flow. > > Mark Langford, Huntsville, AL > N56ML "at" hiwaay.net > see KR2S project at http://home.hiwaay.net/~langford > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > >
