Serge, Thank you for your assistance. Jim Morehead is sending me a sketch also. Joe ----- Original Message ----- From: "Serge F. Vidal" <serge.vi...@ate-international.com> To: "'KRnet'" <kr...@mylist.net> Sent: Monday, February 02, 2004 11:52 PM Subject: RE: KR>Serge Vidal's Throttle Quadrant
> Joe, > > I did not put a mixture lever, because I use a Zenith-Stromberg carburetor, > on which the mixture setting is a screw. I am busy doing a control knob for > that. > > Adding a mixture lever is very easy. All you have to do is to "pile up" two > throttle units, which means you will add a third plate on top of the second > plate. You'll have to make the second handle (mixture) the same way, but > smaller, and bent suitably for clearance. > You'll then use a longer friction screw, which will adjust friction for both > levers at the same time. > It will work fine if you make your spacers accurately. > > Serge Vidal > KR2 ZS-WEC > Tunis, Tunisia (pilot) > Orleans, France (aircraft) > > -----Original Message----- > From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On > Behalf Of joe > Sent: Sunday, February 01, 2004 19:54 > To: KRnet > Subject: Re: KR>Serge Vidal's Throttle Quadrant > > > I know I have probably missed something discussed in previous emails but, is > there a mixture, throttle combination I can't see? > > ----- Original Message ----- > From: "Dan Heath" <da...@alltel.net> > To: <kr...@mylist.net> > Sent: Sunday, February 01, 2004 5:44 AM > Subject: KR>Serge Vidal's Throttle Quadrant > > > If you haven't already seen this, you need to take a look. Serge was kind to > share his work with us in a very nice presentation. The documentation is > terrific and the pictures are great. He provided us with a PowerPoint > presentation that you can download by clicking on the link in the upper > right corner. > > If you get so excited about seeing the pictures up close and personal, that > you forget to read his documentation, I have provided you with a link in the > lower middle of the header for you to get it back. > > Take a look at: http://kr-builder.org/ThrottleQuadrant/index.html > > There is also a link on our home page, right below the weight and balance > links. > > > See N64KR at http://KR-Builder.org - Then click on the pics > > Daniel R. Heath - Columbia, SC > > da...@kr-builder.org > > See you in Mt. Vernon - 2004 - KR Gathering > > See our EAA Chapter 242 at http://EAA242.org > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html > > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
