Joe, I did not put a mixture lever, because I use a Zenith-Stromberg carburetor, on which the mixture setting is a screw. I am busy doing a control knob for that.
Adding a mixture lever is very easy. All you have to do is to "pile up" two throttle units, which means you will add a third plate on top of the second plate. You'll have to make the second handle (mixture) the same way, but smaller, and bent suitably for clearance. You'll then use a longer friction screw, which will adjust friction for both levers at the same time. It will work fine if you make your spacers accurately. Serge Vidal KR2 ZS-WEC Tunis, Tunisia (pilot) Orleans, France (aircraft) -----Original Message----- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of joe Sent: Sunday, February 01, 2004 19:54 To: KRnet Subject: Re: KR>Serge Vidal's Throttle Quadrant I know I have probably missed something discussed in previous emails but, is there a mixture, throttle combination I can't see? ----- Original Message ----- From: "Dan Heath" <da...@alltel.net> To: <kr...@mylist.net> Sent: Sunday, February 01, 2004 5:44 AM Subject: KR>Serge Vidal's Throttle Quadrant If you haven't already seen this, you need to take a look. Serge was kind to share his work with us in a very nice presentation. The documentation is terrific and the pictures are great. He provided us with a PowerPoint presentation that you can download by clicking on the link in the upper right corner. If you get so excited about seeing the pictures up close and personal, that you forget to read his documentation, I have provided you with a link in the lower middle of the header for you to get it back. Take a look at: http://kr-builder.org/ThrottleQuadrant/index.html There is also a link on our home page, right below the weight and balance links. See N64KR at http://KR-Builder.org - Then click on the pics Daniel R. Heath - Columbia, SC da...@kr-builder.org See you in Mt. Vernon - 2004 - KR Gathering See our EAA Chapter 242 at http://EAA242.org _______________________________________ to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html _______________________________________ to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
