Larry, I just finished this work a couple weeks ago. The short of it is the glass is transparent and I could see the hole locations to open them up. Also I had match drilled the hing to the spar and could have lined it up again and dimpled through the hing holes to find the holes in the spar-- Good Luck -- Joe Horton
On Wed, 14 Jan 2004 07:56:57 -0800 larry severson <lar...@socal.rr.com> writes: > I am planning my aileron installation. I understand the value of > putting > wax in the anchor nuts to prevent flox from closing up the access. I > expect > that I will also have to fill the holes drilled in the wood also. My > > question is, how do you locate the openings after the BID is placed > over > the wood to lock it to the aileron/wing? > > Larry Severson > Fountain Valley, CA 92708 > (714) 968-9852 > lar...@socal.rr.com > > > _______________________________________ > to UNSUBSCRIBE from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at > http://www.krnet.org/instructions.html > Joe Horton Coopersburg, Pa. joe.kr2s.buil...@juno.com
