Chris, Aircraft Spruce only stocks the KR spruce kits, not complete kits with plywood. I think your problem might be with Rand Robinson.
Tom Dalby Boulder City, NV ----- Original Message ----- From: <kr2sn50...@aol.com> To: <kr...@mylist.net> Sent: Friday, September 19, 2003 11:24 PM Subject: KR>Wood Inventory from Aircraft Spruce > When I ordered my wood kits from Rand Robertson some time ago, I did not open > all of the boxes and inventory every piece. I was living in a very small > house and really had no place to build the boat except in the master bedroom. (I > was single) I only opened and removed the wood as need it. I was also worried > about removing all of the wood from the boxes and not have a proper place to > stack it so that it would not warp. However, when I went looking for the spar > material for the horizontal and elevator I could not find them. Now I am > cutting out my templates for the wing, making the skins for the wing spars and I am > out of plywood. I've been frugal with the wood not wasting anything but still > I am out. Also I think I've ordered 5/8 random stock at least three times. The > wood came from Aircraft Spruce and then Rand sent it to me. Has else > experienced this kind of shortage from Aircraft Spruce? I only got 3 4' x 8' sheets > of mahogany 3/32 thick, 3 4' x 4' sheets of birch 2.5 mm thick and 1, 4' x 4' > sheet of 1/4 in thick. I lost my material list for the plywood. Is this the > right amount for a Kr2s? > > Chris Theroux > Gilbert, AZ >
