I inventoried everything when it got here, and they didn't fill out the inventory exactly. I wound up with extra, rather than being shorted (and I'm not talking about the 5/8 random). So, it was a mistake I can live with. However, the cables and pullies they sent me don't match quite right. The cables are too big for the pullies, or the pullies are too small for the cables, but I haven't dealt with trying to correct that situation yet, since I'm not to that phase yet.
Mark Youkey myou...@cox.net Oklahoma City ----- Original Message ----- From: <kr2sn50...@aol.com> To: <kr...@mylist.net> Sent: Saturday, September 20, 2003 1:24 AM Subject: KR>Wood Inventory from Aircraft Spruce > When I ordered my wood kits from Rand Robertson some time ago, I did not open > all of the boxes and inventory every piece. I was living in a very small > house and really had no place to build the boat except in the master bedroom. (I > was single) I only opened and removed the wood as need it. I was also worried > about removing all of the wood from the boxes and not have a proper place to > stack it so that it would not warp. However, when I went looking for the spar > material for the horizontal and elevator I could not find them. Now I am > cutting out my templates for the wing, making the skins for the wing spars and I am > out of plywood. I've been frugal with the wood not wasting anything but still > I am out. Also I think I've ordered 5/8 random stock at least three times. The > wood came from Aircraft Spruce and then Rand sent it to me. Has else > experienced this kind of shortage from Aircraft Spruce? I only got 3 4' x 8' sheets > of mahogany 3/32 thick, 3 4' x 4' sheets of birch 2.5 mm thick and 1, 4' x 4' > sheet of 1/4 in thick. I lost my material list for the plywood. Is this the > right amount for a Kr2s? > > Chris Theroux > Gilbert, AZ > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html
