Thanks Rick, looks like I'm tearing in to these wings! I don't know what is under the glass, I hope he didn't put them in to the wood spar. I was actually hoping he glassed over some alum. I have a call in to him for some answers. Thanks again. Tim ----- Original Message ----- From: "Rick Wilson" <rwdw2...@yahoo.com> To: "KR builders and pilots" <kr...@mylist.net> Sent: Tuesday, July 08, 2003 7:01 AM Subject: Re: KR>KR2 Ailerons
> Tim, The plans call for nuts to be floxed to the back > side of the spar and then screws put through the spar > and screwed into the nuts. Same on the aileron spar. > Hope this helps. Rick Wilson. > --- Timothy Bellville <soner...@worldnet.att.net> > wrote: > > Help Guys, > > I made a horrible discovery today, and I need some > > help. On doing an inspection of the wing outer > > panels, I discovered that the original builder had > > used SS rivets to mount the piano hinges to the > > spars, and one came loose! > > > > I scanned the plans but could not find anything > > about the installation of the aileron, just the > > control horn . > > What kind of fastener should be used? and how many? > > Could someone please go in to detail about this most > > critical assembly. > > I have spent a great deal of time finishing this > > little bird, and hopefully this is no big deal. > > At this point, I thought The wings were complete, > > ready for paint. > > Thanks > > Tim Bellville > > KR2 > > N7038V > > Toledo ,Ohio > > _______________________________________________ > > see KRnet list details at > http://www.krnet.org/instructions.html > > > ===== > Rick Wilson, Haleyville, Alabama KR2-0200A -99% rwdw2...@yahoo.com > > > > __________________________________ > Do you Yahoo!? > SBC Yahoo! DSL - Now only $29.95 per month! > http://sbc.yahoo.com > > _______________________________________________ > see KRnet list details at http://www.krnet.org/instructions.html
