Joe, That's a good point. I remembered Larry video for his belly borad and remembered how fast it reploed
-----Original Message----- From: bjoenunley via KRnet <krnet at list.krnet.org> To: Paul-Visk via KRnet <krnet at list.krnet.org> Sent: Mon, Feb 9, 2015 11:20 am Subject: Re: KR> Belly board actuators At an actuation rate of 12mm or .472 inches per second it will take approximately 12 seconds for the belly board to fully extend. Is that fast enough? Joe Sent from my Verizon Wireless 4G LTE smartphone <div>-------- Original message --------</div><div>From: Paul-Visk via KRnet <krnet at list.krnet.org> </div><div>Date:02/09/2015 10:24 AM (GMT-06:00) </div><div>To: krnet at list.krnet.org,PPaulVsk at aol.com </div><div>Subject: KR> Belly board actuators </div><div> </div>I found this 6" actuator at Everestpart Supplies. They also have 4" and 12". I think from what I've read 6" should be ok. Any advise? http://www.everestpartssupplies.com/products/new-heavy-duty-linear-actuator-6-inch-stroke-225-pound-max-lift-dc-12v-12-volt Paul Visk Belleville Il. 618-406-4705 _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
