Paul, I would suggest a section of 4" or 6" PVC pipe. ?It's stiff enough that it won't bend and the edges of the sandpaper will be glued up away from the surface so they can't dig in if it comes loose.
-Jeff Scott White Plains Beach, HI (for this week) > ----- Original Message ----- > From: PPaulVsk at aol.com > Sent: 04/26/14 05:46 PM > To: krnet at list.krnet.org > Subject: KR> Sanding blocks > > Any suggestions on sanding blocks. I made a 4ft board for my horizontal > stabilizer out of a straight 2x4. I'm having problems keeping the sandpaper > on > ?the board. I used contact cement and that's not seem to hold and when the > edges peal up it digs into the foam. I'm at the start of a lot of sanding > and I figure there's a LOT of experience out there with sanding. I could > definitely use some suggestions. > Thanks > > ? > Paul Visk > Belleville Il. > 618-406-4705 > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
