Another suggestion that I used is the stuff they sell to keep you from slipping - comes rough and has a sticky back. Paul N7970K ----- Original Message -----
From: "Adam Tippin via KRnet" <krnet at list.krnet.org> To: "KRnet" <krnet at list.krnet.org> Sent: Thursday, May 15, 2014 10:38:47 PM Subject: Re: KR> Sanding Blocks Little late but just found your email in spam folder. Rap the sand paper around three sides and staple the two sides that you don't intend to use. On Apr 26, 2014 7:01 PM, <PPaulVsk at aol.com> wrote: > > Any suggestions on sanding blocks. I made a 4ft board for my horizontal > stabilizer out of a straight 2x4. I'm having problems keeping the > sandpaper on > ?the board. I used contact cement and that's not seem to hold and when the > edges ?peal up it digs into the foam. I'm at the start of a lot of sanding > and I figure ?there's a LOT of experience out there with sanding. ?I could > definitely use ?some suggestions. > Thanks > > > Paul ?Visk > Belleville Il. > 618-406-4705 > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
