I also build R/C planes and the hobby shops sell sandpaper on the roll for about 5 -7$ It has a sticky back and you can stick it to almost anything, angle iron/aluminum, edge of 2 X 4, etc. worked great for me.
Wayne -----Original Message----- From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of ppaulvsk at aol.com via KRnet Sent: May-16-14 8:07 AM To: via KRnet Subject: Re: KR> Sanding Blocks That's a good idea and its cheaper than the floor sander paper. Paul Visk Bellev Sent from my HTC on the Now Network from Sprint! ----- Reply message ----- From: "via KRnet" <krnet at list.krnet.org> List-Post: krnet@list.krnet.org Date: Fri, May 16, 2014 7:21 am Subject: KR> Sanding Blocks To: "Adam Tippin" <adamtippin at gmail.com>, "KRnet" <krnet at list.krnet.org> Another suggestion that I used is the stuff they sell to keep you from slipping - comes rough and has a sticky back. Paul N7970K ----- Original Message ----- From: "Adam Tippin via KRnet" <krnet at list.krnet.org> To: "KRnet" <krnet at list.krnet.org> Sent: Thursday, May 15, 2014 10:38:47 PM Subject: Re: KR> Sanding Blocks Little late but just found your email in spam folder. Rap the sand paper around three sides and staple the two sides that you don't intend to use. On Apr 26, 2014 7:01 PM, <PPaulVsk at aol.com> wrote: > > Any suggestions on sanding blocks. I made a 4ft board for my > horizontal stabilizer out of a straight 2x4. I'm having problems > keeping the sandpaper on > the board. I used contact cement and that's not seem to hold and when > the edges peal up it digs into the foam. I'm at the start of a lot of > sanding and I figure there's a LOT of experience out there with > sanding. I could definitely use some suggestions. > Thanks > > > Paul Visk > Belleville Il. > 618-406-4705 > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
